View LM150X05-A3_6958753.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 1/28 paul lee / g.manager specification for approval ( ) preliminary specification ( ) final specification title 15.0 xga tft lcd buyer model supplier *model suffix lg.philips lcd co., ltd. lm150x05 a3 *when you obtain standard approval, please use the above model name without suffix signature date // / please return 1 copy for your confirmation with your signature and comments. product engineering dept. lg. philips lcd co., ltd approved by date reviewed by prepared by s. g. hong / manager j. y. lee / engineer www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 2/28 no. item page cover contents record of revisions general description absolute maximum ratings electrical specifications electrical charactreistics interface connections signal timing specifications signal timing waveforms color input data referenece power sequence optical specifications mechanical characteristics reliability international standards safety emc packing designation of lot mark packing form precautions -- - 12 3 3-1 3-2 3-3 3-4 3-5 3-6 45 6 7 7-1 7-2 8 8-1 8-2 9 12 3 4 5 6 6 8 11 13 14 15 17 21 24 25 25 25 26 26 26 27 power dip condition 3-7 16 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 3/28 records of revisions revision no date page description 0.0 aug. 17, 2001 - first draft www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 4/28 1. general description the LM150X05-A3 is a color active matrix liquid cry stal display with an integral cold cathode fluorescent lamp(ccfl) backlight system. the matri x employs a-si thin film transistor as the active element. it is a transmissive type display operating in the normally white mode. this tft-lcd has a 15. 0 inches diagonally measured active display area with xga resolution(768 vertical by 1024 horizontal pix el array). each pixel is divided into red, green and blue sub-pixels or dots which are arranged in verti cal stripes. gray scale or the brightness of the sub-p ixel color is determined with a 6-bit gray scale si gnal for each dot, thus, presenting a palette of more than 2 62,144 colors. the LM150X05-A3 has been designed to apply the 2-po rt ttl (2-pixel 1-clock) interface method. the LM150X05-A3 lcd is intended to support applicat ions where high brightness, wide viewing angle, high color saturation, and high color depth are ver y important. in combination with the vertical arrangement of the sub-pixels, the LM150X05-A3 char acteristics provide an excellent flat panel display for office automation products such as monitors. general features display operating mode active screen size outline dimension pixel pitch pixel format color depth luminance, white power consumption weight surface treatments transmissive mode, normally white 15.0 inches(304.1 x 228.1) diagonal 331.3(h) 257.9(v) 11.0(d) mm (typ) 0.297 mm x 0.297mm 1024 horiz. by 768 vert. pixels rgb stripes arrange ment 6-bit, 262,144 colors 200 cd/m 2 (typ.) total 9.0 watt(typ.) 1050g (typ) hard coating(3h) anti-glare treatment of the front polarizer [ figure 1 ] block diagram www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 5/28 2. absolute maximum ratings the following are maximum values which, if exceeded , may cause operation or damage to the unit. table 1. absolute maximum ratings parameter symbol values min. max. units notes power input voltage signal input voltage operating temperature storage temperature operating ambient humidity storage humidity v dd v i t op t st h op h st -0.3 -0.3 0 -20 10 10 5.5 3.6 50 60 90 90 vdc v c c %rh %rh at 25 2 c 11 1 1 note : 1. temperature and relative humidity range a re shown in the [ figure 2 ] wet bulb temperature should be 40 c max, and no condensation of water. [ figure 2 ] temperature and relative humidity www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 6/28 3. electrical specifications 3-1. electrical characteristics the LM150X05-A3 requires two power inputs. one is employed to power the lcd electronics and to drive the tft array and liquid crystal. another which pow ers the ccfl, is typically generated by an inverter. the inverter is an external unit to the lcd. table 2. electrical characteristics parameter symbol values min. typ. max. units notes module : signal input voltage power supply input voltage permissive power input ripple power supply input current power consumption rush current lamp : operating voltage operating current established starting voltage at 25 c at 0 c operating frequency discharge stabilization time power consumption life time v i v dd v rf i dd p c i rush v bl i bl v bs f bl t s p bl 3.0 4.5 -- - 460 3.0 -- 45 - 30,000 3.3 5.0 - 0.26 1.3 1.0 480 8.0 -- 60 7.7 - 3.6 5.5 0.1 0.55 3.1 2.0 590 9.0 850 1100 80 3 8.5 - vv v pp a watts a v rms ma v rms v rms khz minutes watts hrs 12 34 5 6 7 8 note. the design of the inverter must have specifications for the lamp in lcd assembly. the performance of the lamp in lcm, for example life time or brightness, is extremely influenced by the characteristics of the dc-ac inverter. so all t he parameters of an inverter should be carefully designed so as not to produce too much leakage curr ent from high-voltage output of the inverter. when you design or order the inverter, please make sure unwanted lighting caused by the mismatch of the lamp and the inverter(no lighting,flicker,etc) never occurs.when you confirm it,the lcd assembly should be operated in the same condition as install ed in your instrument. note. do not attach a conducting tape to lamp connecting wire.. if the lamp wire attach to conducting tape, tft-lcd module have a low luminance and the inverte r has abnormal action because leakage current occurs between lamp wire and conducting tape. 1. the specified current and power consumption are under the v dd =5.0v, 25 c, f v (frame frequency) =60hz condition whereas mosaic(black & white) patte rn shown in the [ figure 3 ] is displayed. 2. the duration of rush current is about 20ms. 3. the variance of the voltage is 10%. 4. the voltage above v bs should be applied to the lamps for more than 1secon d for start-up. otherwise,the lamps may not be turned on. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 7/28 the output of the inverter must have symmetrical(ne gative and positive) voltage waveform and symmetrical current waveform.(unsymmetrical ratio i s less than 10%) please do not use the inverter which has unsymmetrical voltage and unsymmetrical c urrent and spike wave. lamp frequency may produce interference with horizo ntal synchronous frequency and as a result this may cause beat on the display.therefore lamp freque ncy shall be as away as possible from the horizontal synchronous frequency and from its harmo nics in order to prevent interference. lets define the brightness of the lamp after being lighted for 5 minutes as 100%. t s is the time required for the brightness of the cent er of the lamp to be not less than 95%. the used lamp current is the lamp typical current. the lamp power consumption shown above does not inc lude loss of external inverter. the used lamp current is the lamp typical current. the life time is determined as the time at which br ightness of lamp is 50% compared to that of initial value at the typical lamp current on condition of c ontinuous operating at 25 2 . 5. 6. 7. 8. [ figure 3 ] mosaic pattern for power consumption m easurement www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 8/28 3-2. interface connections this lcm has three interface connections, a 60 pin connector is used for the module electronics and, t wo three pin connectors are used for the integral back light system. the interface pin configuration for the connector i s shown in the table below. lcd connector : fx8-60s-sv(hirose electric co.,ltd. ) mating connector : fx8-60p-sv or fx8-60p-sv-1(hiros e electric co.,ltd.) table 3. module connector pin configuration pin symbol description notes 12 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 gnd rb0 rb1 rb2 rb3 rb4 rb5 gnd gb0 gb1 gb2 gb3 gb4 gb5 gnd bb0 bb1 bb2 bb3 bb4 bb5 gnd ra0 ra1 ra2 ra3 ra4 ra5 gnd ga0 gnd red even data signal(lsb) red even data signal red even data signal red even data signal red even data signal red even data signal(msb) gnd green even data signal(lsb) green even data signal green even data signal green even data signal green even data signal green even data signal(msb) gnd blue even data signal(lsb) blue even data signal blue even data signal blue even data signal blue even data signal blue even data signal(msb) gnd red odd data signal(lsb) red odd data signal red odd data signal red odd data signal red odd data signal red odd data signal(msb) gnd green odd data signal(lsb) even data means second pixel data odd data means first pixel data www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 9/28 pin symbol description notes 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 ga1 ga2 ga3 ga4 ga5 gnd ba0 ba1 ba2 ba3 ba4 ba5 gnd gnd gnd vsync hsync enab gnd gnd ckb cka gnd gnd gnd mode vcc vcc vcc vcc green odd data signal green odd data signal green odd data signal green odd data signal green odd data signal(msb) gnd blue odd data signal(lsb) blue odd data signal blue odd data signal blue odd data signal blue odd data signal blue odd data signal(msb) gnd gnd gnd vertical synchronous signal horizontal synchronous signal data enable signal(signal to settle the display pos ition) gnd gnd clock b signal for sampling even data signal clock a signal for sampling odd data signal gnd gnd gnd timing signal select +5v power supply +5v power supply +5v power supply +5v power supply 47ohm mode to control asic 10k notes: 1. mode is set low in lcd module, if this pin is open or low then data latch is at falling edge trigger, high then rising edge trigger. mode signal circuit in lcd module is shown in the [ figure 4 ]. 1 [ figure 4 ] mode signal circuit in lcd module www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 10/28 note 2. correspondence between input data and scree n image. display data of 2-pixels are latched by 1-cycle of dclk. odd data refers to first pixel data. even data refers to second pixel data. ro go bo re ge be ro go bo re ge be ro go bo re ge be ro go bo re ge be (1,1) (1,1) (1,1) (1,1) 1,2 1,21,2 1,2 2,2 2,22,2 2,2 3,2 3,23,2 3,2 1024,1 1024,1 1024,1 1024,1 1024,768 1024,768 1024,768 1024,768 1,1 1,11,1 1,1 2,1 2,12,1 2,1 3,1 3,13,1 3,1 1,3 1,31,3 1,3 2,3 2,32,3 2,3 3,3 3,33,3 3,3 1,768 1,768 1,768 1,768 2,768 2,768 2,768 2,768 3,768 3,768 3,768 3,768 1024,2 1024,2 1024,2 1024,2 1024,3 1024,3 1024,3 1024,3 pixel assignment of lcd active area pixel assignment of lcd active area pixel assignment of lcd active area pixel assignment of lcd active area top side back side of lcm bottom side pin 60 pin 2 pin 59 pin 1 3. all gnd(ground) pins should be connected togethe r and to vss which should also be connected to the lcd s metal frame. 4. all v dd (power input) pins should be connected together. (2,1) (2,1) (2,1) (2,1) [ figure 5 ] pixel assignment [ figure 6 ] user connector view www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 11/28 the backlight interface connector is a model bhr-03 vs-1, manufactured by jst. the mating connector part number is sm02(8.0)b-bhs-1-tb or equivalent. the pin configuration for the connector is shown in the table below. table 4. backlight connector pin configuration pin symbol description notes 12 3 hv nc lv power supply for lamp (high voltage side) no connect power supply for lamp (low voltage side) 1 notes : 1. the high voltage side terminal is color ed pink. [ figure 7 ] backlight connector view www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 12/28 3-3. signal timing specifications this is the signal timing required at the input of the user connector. all of the interface signal ti ming should be satisfied with the following specifications for its proper operation. table 5. timing table item symbol min typ. max. unit notes t clk 25 30.8 40 ns f clk 25 32.5 40 mhz period frequency dclk hsync t hp 584 672 680 period t clk t wh 12 68 120 width t vp 780 806 830 period f v 50 60 75 frequency t hp hz t wv 1 6 24 width t hp vsync t clk t hp t hv 512 512 512 horizontal valid t hbp 12 12 - horizontal back porch t hfp 24 80 - horizontal front porch - 48 160 t hp - t hv horizontal blank de (data enable) t vv 768 768 768 vertical valid t vbp 2 29 - vertical back porch t vfp 1 3 - vertical front porch - 4 38 t vp - t vv vertical blank t wh + t hbp + t hfp t wv + t vbp + t vfp set up time hold time set up time data hold time ns for dclk t si t hi t sd t hd 3 - - 3 - - 3 - - 3 - - www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 13/28 3-4. signal timing waveforms dclk hsync, vsync, de, data, dclk t clk valid invalid invalid de(data enable) 2.3v 1v data hsync de(data enable) vsync de(data enable) t wh t hp t hfp t hbp t vp t wv t vbp t vfp t hv t vv t si t hi t sd t hd [ figure 8 ] signal timing waveforms www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 14/28 3-5. color input data reference the brightness of each primary color(red,green and blue) is based on the 6-bit gray scale data input f or the color ; the higher the binary input, the brighter t he color. the table below provides a reference for color versus data input. table 6. color data reference color input color data red green blue msb lsb msb lsb msb lsb ro5 ro4 ro3 ro2 ro1 ro0 re5 re4 re3 re2 re1 re0 01 0 0 0 1 1 1 black red(63) green(63) blue(63) cyan magenta yellow white 01 0 0 0 1 1 1 01 0 0 0 1 1 1 01 0 0 0 1 1 1 01 0 0 0 1 1 1 01 0 0 0 1 1 1 00 1 0 1 0 1 1 00 1 0 1 0 1 1 00 1 0 1 0 1 1 00 1 0 1 0 1 1 00 1 0 1 0 1 1 00 1 0 1 0 1 1 00 0 1 1 1 0 1 00 0 1 1 1 0 1 00 0 1 1 1 0 1 00 0 1 1 1 0 1 00 0 1 1 1 0 1 00 0 1 1 1 0 1 basic colors 00 0 : 11 1 red(00) dark red(01) red(02) : red(61) red(62) red(63) bright 00 0 : 11 1 00 0 : 11 1 00 0 : 11 1 00 1 : 01 1 01 0 : 10 1 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 red 00 0 : 00 0 green(00)dark green(01) green(02) : green(61) green(62) green(63) bright 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 11 1 00 0 : 11 1 00 0 : 11 1 00 0 : 11 1 00 1 : 01 1 01 0 : 10 1 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 green 00 0 : 00 0 blue(00) dark blue(01) blue(02) : blue(61) blue(62) blue(63) bright 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 11 1 00 0 : 11 1 00 0 : 11 1 00 0 : 11 1 00 1 : 01 1 01 0 : 10 1 blue go5 go4 go3 go2 go1 go0 ge5 ge4 ge3 ge2 ge1 ge0 bo5 bo4 bo3 bo2 bo1 bo0 be5 be4 be3 be2 be1 be0 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 15/28 3-6. power sequence t 6 interface signal, v i (ttl signal) power for lamp power supply for lcd v dd 90% 10% 10% 0v 90% t 1 t 2 t 5 valid data 0v off off lamp on t 7 t 3 t 4 parameter values units min. typ. max. t 1 t 2 t 3 t 4 t 5 t 6 t 7 - 0 200 200 0 - 500 -- - - - - - 10 50 -- 50 10 - ms ms ms ms ms ms ms notes : 1. please avoid floating state of interfac e signal at invalid period. 2. when the interface signal is invalid, be sure to pull down the power supply for lcd v dd to 0v. 3. lamp power must be turn on after power supply fo r lcd and interface signal are valid. 0v table 7. power sequence time delay [ figure 9 ] power sequence www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 16/28 3-7. v dd power dip condition 1) dip condition 2.5v v dd 4.5v , t d 20ms 2) v dd 2.5v v dd -dip conditions should also follow the power on/off conditions for supply voltage. 4.5v 2.5v v dd t d [ figure 10 ] power dip condition www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 17/28 4. optical specification optical characteristics are determined after the un it has been on and stable for approximately 30 min utes in a dark environment at 25 c. the values specified are at an approximate dista nce 50cm from the lcd surface at a viewing angle of f and q equal to 0 . [ figure 11 ] presents additional information conce rning the measurement equipment and method. [figure 11] optical characteristic measurement equi pment and method lcd module optical stage(x,y) field = 1 pritchard pr-880 or equivalent 500mm parameter symbol values min. typ. max. units notes contrast ratio surface luminance, white luminance variation response time rise time decay time cie color coordinates red green blue white viewing angle x axis, right( f =0 ) x axis, left ( f =180 ) y axis, up ( f =90 ) y axis, down ( f =270 ) gray scale flicker table 8. optical characteristics cr l wh d white tr tr r tr d xr yr xg yg xb yb xw yw q r q l q u q d 200 170 -- - 0.596 0.317 0.278 0.558 0.116 0.089 0.283 0.299 55 55 40 40 -- 300 200 - 30 10 20 0.626 0.347 0.308 0.588 0.146 0.119 0.313 0.329 60 60 45 45 2.2 - -- 1.3 50 15 35 0.656 0.377 0.338 0.618 0.176 0.149 0.343 0.359 -- - - - -20 cd/m 2 ms degree db 12 3 4 5 6 7 (ta=25 c, v dd =5.0v, f v =60hz dclk=32.5mhz, i bl =8ma) www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 18/28 1. contrast ratio(cr) is defined mathematically as : surface luminance with all white pixels contrast ratio = surface luminance with all black pixels 2. surface luminance is the center point across the lcd surface 50cm from the surface with all pixels displaying white. for more information see [ figure 12 ]. when i bl =8ma, l wh =170cd/m 2 (min.) 200cd/m 2 (typ.) 3. the variation in surface luminance , d white is determined by measuring l on at each test position 1 through 5, and then dividing the maximum l on of 5 points luminance by minimum l on of 5 points luminance. for more information see [ figure 12 ]. d white = maximum(l on1 ,l on2 , .. l on5 ) ? minimum(l on1 ,l on2 , .. l on5 ) 4. response time is the time required for the displ ay to transition from to black(rise time, tr r ) and from black to white(decay time, tr d ). for additional information see [ figure 13 ]. 5. viewing angle is the angle at which the contrast ratio is greater than 10. the angles are determined for the horizontal or x axis and the ver tical or y axis with respect to the z axis which is normal to the lcd surface. for more information see [ figure 14 ]. 6. gray scale specification notes : table 9. gray scale 7. flicker is measured at cyan dot pattern of forgr ound rgb(0,0,0) and background rgb(0,31,31). gray level luminance(%) (typ.) l0 l7 l15 l23 l31 l39 l47 l55 l63 0.22 0.81 4.29 11.4 22.1 36.4 55.4 78.0 100 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 19/28 [ figure 13 ] response time the response time is defined as the following figur e and shall be measured by switching the input signal for black and white. 100 90 10 0 % optical response white black white [ figure 12 ] luminance measuring point 512 (pixel) 384 (pixel) 1 3 2 5 4 h a b v active area a : h/4 mm b : v/4 mm h : 304.1 mm v : 228.1 mm @ h,v : active area tr r tr d www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 20/28 [ figure 14 ] viewing angle f = 90 (12:00) yu q = 0 z z' yd q f f = 180 (9:00) a f = 0 (3:00) xr f = 270 (6:00) tft lcd module xl www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 21/28 5. mechanical characteristics the contents provide general mechanical characteris tics for the model lm150x05-a2. in addition, the figures in the next page are detailed mechanica l drawing of the lcd. outside dimensions horizontal vertical depth horizontal vertical horizontal vertical bezel area active display area weight surface treatment hard coating 3h. anti-glare, lr coating treatment of the front polarizer. 331.3 0.5 m 257.9 0.5 mm 11.0 0.5 mm 308.2 0.5 mm 232.2 0.5 mm 304.128 mm 228.096 mm 1050g(typ.) table 10. mechanical characteristics www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 22/28 [ figure 15 ] lm150x05 front view lm150x05 front view lm150x05 front view lm150x05 front view www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 23/28 [ figure 16 ] lm150x05 rear view lm150x05 rear view lm150x05 rear view lm150x05 rear view www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 24/28 6. reliability { result evaluation criteria } there should be no change which might affect the pr actical display function when the display quality test is conducted under normal operating condition. no. test item conditions 1 high temperature storage test ta= 60 c 240h 2 low temperature storage test ta= -20 c 240h 3 high temperature operation test ta= 50 c 50%rh 240h 4 low temperature operation test ta= 0 c 240h 7 vibration test (non-operating) wave form : sine vibration level : 1.2g bandwidth : 5-500hz duration : x,y,z, 20 mins each direction 8 shock test (non-operating) shock level : 100g waveform : sine wave, 11ms direction : x, y, z one time, each direction 9 altitude storage / shipment 0 - 40,000 feet(12,192m) 5 humidity condition operation 10 % rh ~ 90 % rh 6 humidity condition storage 10 % rh ~ 90 % rh table 11. environment test condition www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 25/28 7. international standards 7-1. safety a) ul 1950 third edition, underwriters laboratories , inc. jan. 28, 1995. standard for safety of information technology equip ment including electrical business equipment. b) can/csa c22.2 no. 950-95 third edition, canadian standards association, jan. 28, 1995. standard for safety of information technology equip ment including electrical business equipment. c) en 60950 : 1992+a1: 1993+a2: 1993+a3: 1995+a4: 1 997+a11: 1997 iec 950 : 1991+a1: 1992+a2: 1993+a3: 1995+a4: 1996 european committee for electrotechnical standardiza tion(cenelec) european standard for safety of information technol ogy equipment including electrical business equipment. 7-2. emc a) ansi c63.4 methods of measurement of radio-nois e emissions from low-voltage electrical and electrical equipment in the range of 9khz to 40 ghz. american national standards institute(ansi), 1992 b) c.i.s.p.r limits and methods of measurement of radio interface characteristics of information technology equipment. international spe cial committee on radio interference c) en 55022 limits and methods of measurement of r adio interface characteristics of information technology equipment. european committe e for electrotechnical standardization (cenelec), 1998 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 26/28 8. packing 8-1. designation of lot mark a) lot mark a b c d e f g h i j k l m a,b,c : size d : year e : month f,g : panel code h : assembly code i,j,k,l,m : serial no. note: 1. year b) location of lot mark 2. month serial no. is printed on the label. the label is at tached to the backside of the lcd module. this is subject to change without prior notice. 8-2. packing form a) package quantity in one box : 8 pcs b) box size : 344mm x 315mm x 410mm. year mark 97 7 98 8 99 9 2000 0 2001 1 2002 2 2003 3 2004 4 2005 5 2006 6 2007 7 month mark jan. 1 feb. 2 mar. 3 apr. 4 may. 5 jun. 6 jul. 7 aug. 8 sep. 9 oct. a nov. b dec. c 3. serial no. serial no. mark 1 ~ 99999 00001 ~ 99999 100000 ~ a0001 ~ a9999,, z9999 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 27/28 9. precautions please pay attention to the following when you use this tft lcd module. 9-1. mounting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so t hat uneven force(ex. twisted stress) is not applied to the module. and the case on which a module is mounted should ha ve sufficient strength so that external force is not transmitted directly to the module. (3) please attach a transparent protective plate to the surface in order to protect the polarizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials fo r the cover case are not describe because the forme r generates corrosive gas of attacking the polarizer a t high temperature and the latter causes circuit break by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizer s with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothe s with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth.(some cosmetics are determined to the polarizer.) (7) when the surface becomes dusty, please wipe gen tly with absorbent cotton or other soft materials like chamois soaks with petroleum benzene. normal-h exane is recommended for cleaning the adhesives used to attach front / rear polarizers. d o not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possi ble. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9-2. operating precautions (1) the spike noise causes the mis-operation of cir cuits. it should be lower than following voltage : v= 200mv(over and under shoot voltage) (2) response time depends on the temperature.(in lo wer temperature, it becomes longer.) (3) brightness depends on the temperature. (in lowe r temperature, it becomes lower.) and in lower temperature, response time(required ti me that brightness is stable after turned on) becomes longer. (4) be careful for condensation at sudden temperatu re change. condensation makes damage to polarizer or electrical contacted parts. and after fading condensation, smear or spot will occur. (5) when fixed patterns are displayed for a long ti me, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference shall be done by system manufacturers. grounding an d shielding methods may be important to minimized the interference. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification LM150X05-A3 liquid crystal display ver. 0.0 aug. 17, 2001 28/28 since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make c ertain that treatment persons are connected to ground thro ugh wrist band etc. and dont touch interface pin d irectly. 9-3. electrostatic discharge control strong light exposure causes degradation of polariz er and color filter. 9-4. precautions for strong light exposure when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the m odule to sunlight or fluorescent light. keep the temperature between 5 c and 35 c at normal humidity. (2) the polarizer surface should not come in contac t with any other object. it is recommended that they be stored in the contai ner in which they were shipped. 9-5. storage (1) when the protection film is peeled off, static electricity is generated between the film and polar izer. this should be peeled off slowly and carefully by p eople who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) the protection film is attached to the polarize r with a small amount of glue. if some stress is ap plied to rub the protection film against the polarizer du ring the time you peel off the film, the glue is ap t to remain on the polarizer. please carefully peel off the protection film witho ut rubbing it against the polarizer. (3) when the module with protection film attached i s stored for a long time, sometimes there remains a very small amount of glue still on the polarizer af ter the protection film is peeled off. (4) you can remove the glue easily. when the glue r emains on the polarizer surface or its vestige is recognized, please wipe them off with absorbent cot ton waste or other soft material like chamois soaked with normal-hexane. 9-6. handling precautions for protection film www.datasheet.net/ datasheet pdf - http://www..co.kr/

▲Up To Search▲

Price & Availability of LM150X05-A3

	To Download LM150X05-A3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .